1. It is a device inserted to a convenience outlet to conduct electric current.
A Conduit
B. Flat cord
C. Stranded wire
D. Male plug
2. It is made of a single strand of copper or aluminum wire.
A Flat cord
B. Solid wire
C. Stranded wire
D. Wire stripper
3. It is a device that holds and protects the lamp.
A Fuse
B. Lamp holder
C. Male plug
D. Philips Screw Driver
4. A device that connects and disconnects the flow of electric current in a circuit.
A Circuit breaker
B. Junction box
C. Switch
D. Utility box
5. A circuit protective device that automatically blows and cut the current when overload or short circuit happens. A Circuit breaker
B. Fuse
C. Outlet
D. Utility box
6. This has a cross tip resembling a positive (+) sign. This is used to drive screws with cross slotted heads.
A Flat screwdriver
B. Long nose pliers
C. Philips screwdriver
D. Wrench
7. This tool is used in driving, pounding and pulling out of nails
.A. Flat screw driver
B. Hammer
c. Side cutting pliers
D. Wire stripper
8. This is made from metal with insulators in the handle and are used for cutting, twisting, bending, holding, and gripping of wires and cables.
A. Hammer
B. Pliers
C. Screw driver
D. Stripper
9. A tool used for removing insulation of medium sized wires ranging from gauge #10 to gauge #16
A. Combination pliers
B. Electrician knife
C. Long nose pliers
D. Wire stripper
10. This tool is used to cut metal conduit and armored cable.
A. Hacksaw
B. Hammer
C. Screw driver
D. Wrench
11. These are used to measure currents, voltages, resistances, wattages and other important elements in electrical works
. B. Measuring tools
C. Power tools
A. Electric tools
D. Pneumatic tools
12. This is a pocket size tool used to test the line wire or circuit if there is current in it.
B. Clamp meter
C. Test light
A. Ammeter
D. Wire gauge
13. This is used in determining the size of wires/conductors.
B. Multi-tester
C. Test light
A. Clamp meter
D. Wire gauge
14. This is the process or the result of determining the ratio of a physical quantity, such as length, time and temperature.
A. Evaluation B. Measurement C. Testing D. Systematizing
​