II - Directions: Arrange the steps in threading the upper and lower parts of the sewing machine. Write number 1 for the first step, 2 for the second step, and so on. Write your answer in your answer in your quiz notebook. A. STEPS IN THREADING THE UPPER PART Thread the needle Pull it through the lower thread guide Pull the thread down on the thread guide. Bring thread to the guide. Pull the thread between the metal disc of the tension. Bring the thread up to the lower thread take up lever and raise it as it goes. B. STEPS IN THREADING THE LOWER PART Remove the bobbin case by pulling on the bobbin case latch. Pull the upper and lower thread together by four inches. Remove the bobbin from the case and wind the thread. Start the mechanism by rolling the balance wheel forward to get the thread of the bobbin through the needle. Be sure that you hear the case being locked upon inserting the bobbin case inside the shuttle. Put the bobbin back to the bobbin case and pull the thread through the little slot at least four inches.
