Multiple Choice

Direction: Read the questions carefully and choose the best possible answer. Write

your worksheet notebook

1. What is the approximate length of wire for threading in the wiring method?

A. 1 inch longer

B. 1 inch shorter C. 2 inches longer

D. 2 inches shorter

2. What is the estimated length of wire in coiling a hook and fastening a loop?

A. 10 inches

B. 11 inches C. 12 inches

D. 13 inches

3. How many strands of thread is needed in braiding the ends of a fashion accessory?

A. 2 threads

B. 3 threads

C. 4 threads D. 5 threads

4. What is the craft of stringing beads together to make jewelry or other decorative items?

A. Beading

B. Braiding

C. Coiling

D. Knotting

5. What is the process of joining three or more pieces of string-like material by putting them

over each other in a special pattern?

A. Beading

B. Braiding

C. Twisting D. Wiring

6. What is the method of arranging a rope, hair, or wire into a series of circles, one above or

outside the other? A. Coiling

B. Knatting

C. Twisting D. Wiring

your answer in

What tool is used in knotting between beads?

A. Needle

B. Pliers

C. Ruler D. Scissors

8. In coiling a hook and fastening a loop, which type of pliers is used in bending the wire over

that forms a loop? A. Crimping pliers

B. Curved chain-nose pliers

C. Round-nose pliers D. Snipe-nose pliers

9. How is the wire ſolded in wiring a doughnut? A. Bend the wire through the doughnut with one

end longer than the other.

B. Bend the wire through the doughnut with one end shorter than the other.

C. Fold the wire through the doughnut with one end longer than the other.

D. Fold the wire through the doughnut with one end shorter than the other.

10. Why is necessary to use a needle when knotting between the beads?

A. So that all curves are even

B. So that all ends are even, C. So that all spacing is even

D. So that all strands are even.

11. Why is it important to turn the drill slowly when twisting the wire together?

A. To allow the wires to coil together evenly.

B. To allow the wires to loop together evenly. C. To allow the wires to tuck together evenly

D. To allow the wires to twist together evenly.

12. What technique is appropriate to use if you have beads that has bigger or larger holes?

A. Beading

B. Braiding the ends

C. Double knotting of the beads D. Knotting between the beads

13. How will you make neat coils when wiring a doughnut?

A. Bend the end and press the top with pliers.

B. Braid the end and press the top with pliers

C. Clip the end and press the top with pliers.

D. Knot the end and press the top with pliers. 14. What is the correct order of making a hook?

1. Curve the wire back around the pliers and clip off any excess wire.

2. Bend up the end of the wire and file the end.

3. Cut a few millimetres of wire.

4. File one end and turn a loop.

A. 1, 2, 3, 4

B. 2, 4, 1, 3

C. 3,4, 1, 2 D. 4, 3, 2, 1

15. What is the proper order in double knotting beads? 1. Wrap the thread loosely twice around the finger.

2. Put the needle in the loop and tighten 3. Slide off the thread keeping the loops in place.

A. 1, 2, 3 B. 1, 3, 2

C. 2, 1, 3 D. 2, 3, 1​